Proper cleaning and maintenance can not only increase the service life of shoes, conform to the concept of outdoor environmental protection, but also ensure the performance of shoes. So, how should hiking shoes be maintained and maintained?

5-step maintenance method for hiking shoes





1.inspect


Before and after mountaineering, it is necessary to carefully inspect the condition of the hiking shoes, such as whether there are any abnormalities in the adhesive parts of the shoes, the wear condition of the soles, and the condition of the shoelaces. Timely detection and handling of safety hazards in shoes can prevent potential accidents during mountaineering.

5-step maintenance method for hiking shoes


one


inspect


Before and after mountaineering, it is necessary to carefully inspect the condition of the hiking shoes, such as whether there are any abnormalities in the adhesive parts of the shoes, the wear condition of the soles, and the condition of the shoelaces. Timely detection and handling of safety hazards in shoes can prevent potential accidents during mountaineering.

2.clean


After each activity, thoroughly clean your hiking shoes. You can use a soft brush to clean the dirt, dust, and other debris on the shoe upper; Clean the sand and stones on the sole of the shoe with a hard brush, and do not leave the sand and stones between the grooves; The inside of the shoes also needs to be cleaned. Remove the insole and remove any dirt from the shoes to remove any odor.

3. Air drying


Place the cleaned shoes in a ventilated and cool place to air dry naturally. If shoes get wet during activities, they should be air dried in a timely manner, otherwise it will reduce the breathability of the inner layer of the shoes.


It is best not to dry the shoe with fire or expose it to direct sunlight, as this can damage the shoe upper material and cause the shoe to shrink and deform.

4.waterproof


The shoe upper should be regularly waterproofed to reduce rainwater infiltration. You can apply some specialized waterproof agent and place it in a cool place. After applying waterproof agent, a certain drying time is required, so do not maintain it before climbing. Waterproof agents are divided into two types: sprayed and coated. It is important to confirm that the waterproof agent used is specifically designed for shoes.

5.deposit


Store shoes in a cool and ventilated place to avoid mold. Keep away from high temperatures when storing, as high temperatures can damage the leather, stitching, and adhesive on the soles of shoes; Unlocking the shoelaces and stuffing the last or some newspaper into the shoes can achieve moisture absorption; It is also recommended to lightly tie the long shoelaces in a knot for easy organization.